Additional Manifold Equipment

The BeaconMedæs Emergency Reserve Manifold (ERM) is designed for compliance with HTM 02-01 guidelines.  The ERM is used to support the main manifold and is connected downstream of the manifold control panel.


Semi Automatic Manifold

   
Semi-automatic changeover
Contact gauges connected to each cylinder bank regulator will provide alarm notification when the duty bank is empty.
Primary manifold control system for private facilities, small clinics, etc where local standards are applicable;
Back up supply for medical air plant systems (HTM2022);
Flow capacity is 1200 lpm at 4 bar and 2000 lpm at 7 or 11 bar

Manual Manifold


The manual manifold is designed for use in medical or laboratory gas applications.
Change over to the standby bank of cylinders is achieved by turning off the empty cylinders, and opening the standby cylinders for continuity of gas supply.
Flow capacity is 1200 lpm at 4 bar and 2000 lpm at 7 or 11 bar

Emergency Reserve Manifold  HTM 02-01

   
Two cylinder emergency supply manifold complies to HTM 02-01 and ISO 7396-1.
4 Bar, 7 Bar and 11 Bar pressures
Regulators comply with BS EN ISO 10524-2, test reports available on request
Test point (Gem 10) included as per code requirements
Supplied with integral 2 x 1 manifold header - extensions can be added for extra cylinder capacity
Flow capacity is 1200 lpm at 4 bar and 2000 lpm at 7 or 11 bar

Emergency Reserve Manifold ERM ECO


Two cylinder emergency supply manifold complies to HTM 02-01 and ISO 7396-1.
4 Bar, 7 Bar and 11 Bar pressures
Regulators comply with BS EN ISO 10524-2, test reports available on request
Test point (Gem 10) included as per code requirements
Supplied with integral 2 x 1 manifold header - extensions can be added for extra cylinder capacity
Flow capacity is 200 lpm at 4 bar.

Modular Manifolds


Primary and Secondary headers can be added to gain extra capacity
Integral Non Return Valves
Rack and chain to hold cylinder(s)
Corner Connections made to custom length

Tailpipes


Pin indexed, BSP, CGA and other country specific tailpipes available
Specially tailored tailpipes for local standards
Cupro Nickel material to help prevent work hardening

Duplex Pressure Reducing Sets


Pressure reducing sets to regulate the higher pressure plant output to 4 bar suitable for medical use
Available for 11 bar inlet pressure or 7 bar inlet pressure
11 bar to 7 bar options also available
Complete with isolating valves, relief valves and gauges
Oxygen compatible regulating sets available upon request

Simplex Pressure Reducing Sets


7 bar to 4 bar simplex pressure regulating set complete with gauge, isolating valves and relief valve.